A Non-Woven Lamination Machine is an industrial equipment used for the continuous lamination of multi-layer materials, primarily designed to meet the precise bonding requirements of non-woven fabrics and their combination with other functional materials. This equipment achieves high-strength, uniform lamination of various materials at high speeds through a stable unwinding, metering and gluing, lamination and pressing, slitting, and rewinding system. The entire machine adopts a modular structure, allowing for configuration adjustments based on different material thicknesses, widths, and process requirements. It is suitable for continuous production scenarios requiring high precision, efficiency, and consistency in lamination, making it one of the key pieces of equipment in modern non-woven material processing.

1. High Speed and Stability

This Non-Woven Lamination Machine has a design speed of up to 150 m/min, with a stable operating range of 20–120 m/min.  Even at high speeds, it maintains a lamination surface flatness deviation within ±1 mm, effectively avoiding common material shaking and misalignment problems during high-speed production.

2. Wide-Width Processing

The equipment has an effective lamination width of 2850 mm, supporting continuous production of large-format non-woven fabrics. Compared to conventional 1600–2200 mm equipment, the output area per run is increased by approximately 25%–40%, significantly reducing energy consumption per unit area and the frequency of manual intervention.

3. Precise Control

The entire machine utilizes a servo linkage system for synchronous control of unwinding, gluing, lamination, and rewinding. Tension fluctuation is controlled within ±2%, ensuring even force distribution on multi-layer materials during the lamination process and improving the consistency of finished product lamination strength.

4. Flexible Slitting

The slitting width is continuously adjustable from 35–75 mm, allowing for flexible settings based on product structure requirements. The slitting accuracy error is less than ±0.5 mm, meeting the needs for switching between multiple product specifications on the same production line and reducing changeover time.

5. High Load Capacity

The maximum diameter of both unwinding and rewinding rolls can reach Φ1500 mm, increasing the single roll material weight capacity to more than 1.3 times that of conventional equipment. This effectively reduces the number of roll changes, increasing the continuous operating time and production efficiency of the entire line.

1. Medical Supplies

In the production of medical non-woven materials, this Non-Woven Lamination Machine can achieve multi-layer composite structures with a stable bonding strength of ≥3 N/15 mm, meeting the strict requirements for structural stability and consistency of disposable medical supplies.

2. Hygiene Products

For the composite requirements of absorbent cores and surface non-woven fabrics, the equipment can maintain uniform material bonding under continuous operation at 120 m/min, effectively reducing the defect rate of finished products and improving the stability of large-scale hygiene product production.

3. Packaging Materials

In the processing of paper-plastic or non-woven composite packaging materials, this equipment can achieve wide-width continuous lamination, with a composite layer thickness error controlled within ±5%, meeting the requirements for strength and appearance consistency of packaging materials.

4. Industrial Protection

When used in the production of multi-layer industrial protective materials, the Non-Woven Lamination Machine can stably laminate non-woven fabrics of different weights, covering a weight range of 15–200 g/㎡, suitable for various material structure combinations for industrial applications.

5. Functional Composite Materials

In the field of functional composite materials, the Non-Woven Lamination Machine supports customized composite structure design and can continuously produce complex layered materials, ensuring that performance differences between batches are controlled within 5%, suitable for long-term large-scale production.

Q: What materials are suitable for the Non-Woven Lamination Machine?

A: This equipment is mainly suitable for flexible substrates such as non-woven fabrics, absorbent cores, and paper-plastic composite materials. It has a wide range of material thickness compatibility, capable of stable lamination within the 0.05–3 mm range, meeting various industrial needs.

Q: Is the lamination quality stable during high-speed operation?

A: Under the normal high-speed operation of 120 m/min, the tension and gluing systems remain synchronized, and the lamination strength and appearance consistency are stable, without significant quality fluctuations due to increased speed.

Q: Does it support switching between different product specifications?

A: The equipment supports slitting width adjustment from 35–75 mm. The switching process does not require complex structural adjustments, and the single switching time can be controlled within 30 minutes, suitable for multi-specification production needs.

Q: Are high technical skills required for operators?

A: The equipment is equipped with a one-button start and centralized control system. The daily operation process is standardized, and ordinary technicians can independently complete basic operations after 1–2 days of training.

Q: Does it support customized configurations?

A: This Non-Woven Lamination Machine supports OEM and ODM solutions.  The structure and functions can be customized according to material type, width requirements, and production rhythm to meet the configuration requirements of different production lines.